Featured products
Toyota Sienna Double Cup Holder Insert: 2021-Present (4th Gen) PETG
💥FREE SHIPPING💥 Add a cup holder space with a DOUBLE cup holder insert for a Toyota 2021-Present (4th Gen). AND there is a large option if you have bigger water bottles that do not fit in the existing cup holder spaces. Note- pic either Front or back cup holder placing. Back is closest to the second row, the two spots behind the shifter. Front is closest to the dashboard, the two spots on the passenger side of the middle/right of shifter. Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, sunglasses, small umbrellas, sunscreen, half eaten sandwiches from your toddler, or whatever it is you need to live your daily life running the roads. We are all about that extra beverage life, and we are a large family, so those extra cup holders are vital - sippy cups and sports bottles, anyone? The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes, something the original Honda cup holder space will not accommodate. 📌📌📌📌📌 Please also double check the video and photos to make sure your van’s cup holder set up looks the same as the model van shown, since trim packages may vary. The model van is a 2023.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Are you interested in racing stripes on your cup holder or our Limited Edition USA 250 option? Message us, and we can make it happen. We ran out of picture space on this listing, but those options can been seen on our other cup holder listings. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
Kia Sorento Double Cup Holder Insert: 2nd Gen (2011-2015) 3D Print PETG
💥FREE SHIPPING💥 Add a cup holder space with a DOUBLE cup holder insert for a Kia Sorento 2nd Gen (2011-2015). AND there is a large option if you have bigger water bottles that do not fit in the existing cup holder spaces. Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, sunglasses, small umbrellas, chapsticks, or whatever it is you need to live your daily life running the roads. We are all about that extra beverage life and added space. The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes, something the original Malibu cup holder space will not accommodate. 📌📌📌📌📌 Please also double check the video and photos to make sure your Sorento's cup holder set up looks the same as the model shown, since trim packages may vary. The model Sorento is a 2015.📌📌📌📌📌 Our sample in the pics is printed in PETG red with blue stripes, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. STRIPING AVAILABLE - Like a sporty look? Go for stripes. Choose a primary color from the drop down box for colors and note which color you would like your stripes to be in the personalization box. We can only use the colors listed as options. In the sample photo with stripes, the primary color is red, and the stripe color is blue. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups and half eaten sandwiches.
Ford F150 Cup Holder Insert: 14th Gen (2021-Present) PETG 3D Print
💥FREE SHIPPING💥 DOUBLE cup holder for the Ford F150 14th Gen (2021-Present). Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, sunglasses, extra keys, charging cables, Swiss Army knives, small umbrellas, duck calls, sippy cups, or whatever it is you need to live your daily life on the road. The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Shown in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Also available in the Large size that accommodates Owala 32 & 40 oz sizes, something the original F150 cup holder space will not accommodate. You do big things in your truck, and your cup holder space should be just as capable. 📌📌📌📌📌 Please double check the video and photos to make sure your truck’s cup holder set up looks the same as the model truck shown, since trim packages may vary. The model truck is a 2024 Tremor.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
4Runner 5th Gen Replacement Cup Holder Insert: PETG, Cup Holder Closest to the Dashboard (2010-2024)
💥FREE SHIPPING💥 SINGLE cup holder replacement insert for 4Runner 5 Gen (2010-2024) - the spot closest to the dashboard/front of the vehicle. While we love our 4Runner, walking around with the OEM (original) cup holder stuck to the bottom of our drink is NOT the badge of honor we want. This insert replaces your rubberized stock insert. No installation required. Simply remove the original cup holder and drop this one in its spot. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the replacement cup holder insert to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea but need MORE cupholders in that spot? Check out our double cupholder insert for the for the unique spot to the right of the shifter. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall 🥤🧃5th gen 4 runners only (2010-2024). If you aren't sure if your gift recipient has a 5th gen 4 runner, message us, and we can probably help you figure it out. Not intended for small children, although you can definitely use this product to store their sippy cups.
4Runner 5th Gen Replacement Cup Holder Insert: PETG, Cup Holder Closest to Console (2010-2024)
💥FREE SHIPPING💥 SINGLE cup holder replacement insert for 4Runner 5 Gen (2010-2024) - the spot closest to the console. While we love our 4Runner, walking around with the OEM (original) cup holder stuck to the bottom of our drink is NOT the badge of honor we want. This insert replaces your rubberized stock insert. No installation required. Simply remove the original cup holder and drop this one in its spot. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Our sample in the pics is printed in PETG black, and we also offer man other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the replacement cup holder insert to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea but need MORE cupholders in that spot? Check out our double cupholder insert for the for the unique spot to the right of the shifter. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 16 year old Levi Hall (now 17) 🥤🧃5th gen 4 runners only (2010-2024). If you aren't sure if your gift recipient has a 5th gen 4 runner, message us, and we can probably help you figure it out. Not intended for small children, although you can definitely use this product to store their sippy cups.
Mini Cooper S Double Cup Holder Insert: 3rd Gen (2014-2023) PETG
💥FREE SHIPPING💥 Love the Mini lisfestyle but not shifting into your drink or not being able to even fit your drink into the space? We have the solution- a DOUBLE cup holder insert for the Mini Cooper S Gen 3 (2014-2023). This cup holder levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, small umbrellas, sippy cups, or whatever it is you need to live your daily life on the road. This double cup holder adds an extra cup holder in either of your front cup holder spaces, but we find it works best on the passenger side, as shown in the video. It can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes. 📌📌📌📌📌 Please also double check the video and photos to make sure your Mini's cup holder set up looks the same as the model Mini shown, since trim packages may vary. The model Mini is a 2018.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Racing Stripes available. Choose your primary color from the drop down box and note your preferred stripe color (from our color options) in the personalization box. The primary color in the sample photo is black, and the stripes are red. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
New products
Toyota Sienna Double Cup Holder Insert: 2021-Present (4th Gen) PETG
💥FREE SHIPPING💥 Add a cup holder space with a DOUBLE cup holder insert for a Toyota 2021-Present (4th Gen). AND there is a large option if you have bigger water bottles that do not fit in the existing cup holder spaces. Note- pic either Front or back cup holder placing. Back is closest to the second row, the two spots behind the shifter. Front is closest to the dashboard, the two spots on the passenger side of the middle/right of shifter. Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, sunglasses, small umbrellas, sunscreen, half eaten sandwiches from your toddler, or whatever it is you need to live your daily life running the roads. We are all about that extra beverage life, and we are a large family, so those extra cup holders are vital - sippy cups and sports bottles, anyone? The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes, something the original Honda cup holder space will not accommodate. 📌📌📌📌📌 Please also double check the video and photos to make sure your van’s cup holder set up looks the same as the model van shown, since trim packages may vary. The model van is a 2023.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Are you interested in racing stripes on your cup holder or our Limited Edition USA 250 option? Message us, and we can make it happen. We ran out of picture space on this listing, but those options can been seen on our other cup holder listings. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
Kia Sorento Double Cup Holder Insert: 2nd Gen (2011-2015) 3D Print PETG
💥FREE SHIPPING💥 Add a cup holder space with a DOUBLE cup holder insert for a Kia Sorento 2nd Gen (2011-2015). AND there is a large option if you have bigger water bottles that do not fit in the existing cup holder spaces. Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, sunglasses, small umbrellas, chapsticks, or whatever it is you need to live your daily life running the roads. We are all about that extra beverage life and added space. The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes, something the original Malibu cup holder space will not accommodate. 📌📌📌📌📌 Please also double check the video and photos to make sure your Sorento's cup holder set up looks the same as the model shown, since trim packages may vary. The model Sorento is a 2015.📌📌📌📌📌 Our sample in the pics is printed in PETG red with blue stripes, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. STRIPING AVAILABLE - Like a sporty look? Go for stripes. Choose a primary color from the drop down box for colors and note which color you would like your stripes to be in the personalization box. We can only use the colors listed as options. In the sample photo with stripes, the primary color is red, and the stripe color is blue. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups and half eaten sandwiches.
Ford F150 Cup Holder Insert: 14th Gen (2021-Present) PETG 3D Print
💥FREE SHIPPING💥 DOUBLE cup holder for the Ford F150 14th Gen (2021-Present). Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, sunglasses, extra keys, charging cables, Swiss Army knives, small umbrellas, duck calls, sippy cups, or whatever it is you need to live your daily life on the road. The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Shown in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Also available in the Large size that accommodates Owala 32 & 40 oz sizes, something the original F150 cup holder space will not accommodate. You do big things in your truck, and your cup holder space should be just as capable. 📌📌📌📌📌 Please double check the video and photos to make sure your truck’s cup holder set up looks the same as the model truck shown, since trim packages may vary. The model truck is a 2024 Tremor.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
4Runner 5th Gen Replacement Cup Holder Insert: PETG, Cup Holder Closest to the Dashboard (2010-2024)
💥FREE SHIPPING💥 SINGLE cup holder replacement insert for 4Runner 5 Gen (2010-2024) - the spot closest to the dashboard/front of the vehicle. While we love our 4Runner, walking around with the OEM (original) cup holder stuck to the bottom of our drink is NOT the badge of honor we want. This insert replaces your rubberized stock insert. No installation required. Simply remove the original cup holder and drop this one in its spot. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the replacement cup holder insert to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea but need MORE cupholders in that spot? Check out our double cupholder insert for the for the unique spot to the right of the shifter. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall 🥤🧃5th gen 4 runners only (2010-2024). If you aren't sure if your gift recipient has a 5th gen 4 runner, message us, and we can probably help you figure it out. Not intended for small children, although you can definitely use this product to store their sippy cups.
4Runner 5th Gen Replacement Cup Holder Insert: PETG, Cup Holder Closest to Console (2010-2024)
💥FREE SHIPPING💥 SINGLE cup holder replacement insert for 4Runner 5 Gen (2010-2024) - the spot closest to the console. While we love our 4Runner, walking around with the OEM (original) cup holder stuck to the bottom of our drink is NOT the badge of honor we want. This insert replaces your rubberized stock insert. No installation required. Simply remove the original cup holder and drop this one in its spot. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Our sample in the pics is printed in PETG black, and we also offer man other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the replacement cup holder insert to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea but need MORE cupholders in that spot? Check out our double cupholder insert for the for the unique spot to the right of the shifter. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 16 year old Levi Hall (now 17) 🥤🧃5th gen 4 runners only (2010-2024). If you aren't sure if your gift recipient has a 5th gen 4 runner, message us, and we can probably help you figure it out. Not intended for small children, although you can definitely use this product to store their sippy cups.
Mini Cooper S Double Cup Holder Insert: 3rd Gen (2014-2023) PETG
💥FREE SHIPPING💥 Love the Mini lisfestyle but not shifting into your drink or not being able to even fit your drink into the space? We have the solution- a DOUBLE cup holder insert for the Mini Cooper S Gen 3 (2014-2023). This cup holder levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, small umbrellas, sippy cups, or whatever it is you need to live your daily life on the road. This double cup holder adds an extra cup holder in either of your front cup holder spaces, but we find it works best on the passenger side, as shown in the video. It can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes. 📌📌📌📌📌 Please also double check the video and photos to make sure your Mini's cup holder set up looks the same as the model Mini shown, since trim packages may vary. The model Mini is a 2018.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Racing Stripes available. Choose your primary color from the drop down box and note your preferred stripe color (from our color options) in the personalization box. The primary color in the sample photo is black, and the stripes are red. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
All products
Toyota Sienna Double Cup Holder Insert: 2021-Present (4th Gen) PETG
💥FREE SHIPPING💥 Add a cup holder space with a DOUBLE cup holder insert for a Toyota 2021-Present (4th Gen). AND there is a large option if you have bigger water bottles that do not fit in the existing cup holder spaces. Note- pic either Front or back cup holder placing. Back is closest to the second row, the two spots behind the shifter. Front is closest to the dashboard, the two spots on the passenger side of the middle/right of shifter. Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, sunglasses, small umbrellas, sunscreen, half eaten sandwiches from your toddler, or whatever it is you need to live your daily life running the roads. We are all about that extra beverage life, and we are a large family, so those extra cup holders are vital - sippy cups and sports bottles, anyone? The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes, something the original Honda cup holder space will not accommodate. 📌📌📌📌📌 Please also double check the video and photos to make sure your van’s cup holder set up looks the same as the model van shown, since trim packages may vary. The model van is a 2023.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Are you interested in racing stripes on your cup holder or our Limited Edition USA 250 option? Message us, and we can make it happen. We ran out of picture space on this listing, but those options can been seen on our other cup holder listings. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
Kia Sorento Double Cup Holder Insert: 2nd Gen (2011-2015) 3D Print PETG
💥FREE SHIPPING💥 Add a cup holder space with a DOUBLE cup holder insert for a Kia Sorento 2nd Gen (2011-2015). AND there is a large option if you have bigger water bottles that do not fit in the existing cup holder spaces. Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, sunglasses, small umbrellas, chapsticks, or whatever it is you need to live your daily life running the roads. We are all about that extra beverage life and added space. The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes, something the original Malibu cup holder space will not accommodate. 📌📌📌📌📌 Please also double check the video and photos to make sure your Sorento's cup holder set up looks the same as the model shown, since trim packages may vary. The model Sorento is a 2015.📌📌📌📌📌 Our sample in the pics is printed in PETG red with blue stripes, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. STRIPING AVAILABLE - Like a sporty look? Go for stripes. Choose a primary color from the drop down box for colors and note which color you would like your stripes to be in the personalization box. We can only use the colors listed as options. In the sample photo with stripes, the primary color is red, and the stripe color is blue. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups and half eaten sandwiches.
Ford F150 Cup Holder Insert: 14th Gen (2021-Present) PETG 3D Print
💥FREE SHIPPING💥 DOUBLE cup holder for the Ford F150 14th Gen (2021-Present). Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, sunglasses, extra keys, charging cables, Swiss Army knives, small umbrellas, duck calls, sippy cups, or whatever it is you need to live your daily life on the road. The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Shown in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Also available in the Large size that accommodates Owala 32 & 40 oz sizes, something the original F150 cup holder space will not accommodate. You do big things in your truck, and your cup holder space should be just as capable. 📌📌📌📌📌 Please double check the video and photos to make sure your truck’s cup holder set up looks the same as the model truck shown, since trim packages may vary. The model truck is a 2024 Tremor.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
4Runner 5th Gen Replacement Cup Holder Insert: PETG, Cup Holder Closest to the Dashboard (2010-2024)
💥FREE SHIPPING💥 SINGLE cup holder replacement insert for 4Runner 5 Gen (2010-2024) - the spot closest to the dashboard/front of the vehicle. While we love our 4Runner, walking around with the OEM (original) cup holder stuck to the bottom of our drink is NOT the badge of honor we want. This insert replaces your rubberized stock insert. No installation required. Simply remove the original cup holder and drop this one in its spot. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the replacement cup holder insert to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea but need MORE cupholders in that spot? Check out our double cupholder insert for the for the unique spot to the right of the shifter. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall 🥤🧃5th gen 4 runners only (2010-2024). If you aren't sure if your gift recipient has a 5th gen 4 runner, message us, and we can probably help you figure it out. Not intended for small children, although you can definitely use this product to store their sippy cups.
4Runner 5th Gen Replacement Cup Holder Insert: PETG, Cup Holder Closest to Console (2010-2024)
💥FREE SHIPPING💥 SINGLE cup holder replacement insert for 4Runner 5 Gen (2010-2024) - the spot closest to the console. While we love our 4Runner, walking around with the OEM (original) cup holder stuck to the bottom of our drink is NOT the badge of honor we want. This insert replaces your rubberized stock insert. No installation required. Simply remove the original cup holder and drop this one in its spot. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Our sample in the pics is printed in PETG black, and we also offer man other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the replacement cup holder insert to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea but need MORE cupholders in that spot? Check out our double cupholder insert for the for the unique spot to the right of the shifter. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 16 year old Levi Hall (now 17) 🥤🧃5th gen 4 runners only (2010-2024). If you aren't sure if your gift recipient has a 5th gen 4 runner, message us, and we can probably help you figure it out. Not intended for small children, although you can definitely use this product to store their sippy cups.
Mini Cooper S Double Cup Holder Insert: 3rd Gen (2014-2023) PETG
💥FREE SHIPPING💥 Love the Mini lisfestyle but not shifting into your drink or not being able to even fit your drink into the space? We have the solution- a DOUBLE cup holder insert for the Mini Cooper S Gen 3 (2014-2023). This cup holder levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, small umbrellas, sippy cups, or whatever it is you need to live your daily life on the road. This double cup holder adds an extra cup holder in either of your front cup holder spaces, but we find it works best on the passenger side, as shown in the video. It can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes. 📌📌📌📌📌 Please also double check the video and photos to make sure your Mini's cup holder set up looks the same as the model Mini shown, since trim packages may vary. The model Mini is a 2018.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Racing Stripes available. Choose your primary color from the drop down box and note your preferred stripe color (from our color options) in the personalization box. The primary color in the sample photo is black, and the stripes are red. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
4Runner Double Cup Holder Insert: 5th Gen Toyota (2010-2024) PETG, the Original Double
💥FREE SHIPPING💥 The original DOUBLE cup holder insert for 4Runner 5 Gen (2010-2024). It levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, an air down kit, GMRS radio units, or whatever it is you need to live your daily life on or off the road. As avid 5th Gen 4Runner owners, we are all about that custom life, and we are a large family, so those extra cup holders are vital. The double cup holder doubles the number of cup holders in the front of your 4Runner by using that odd space next to the shifter. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Our samples in the pics are printed in PETG black and a shade of gray lighter than our current Space Gray. The sparkly blue sample photos are closest to our current offering of Burnt Titanium. 🎨Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea but don't need TWO cupholders in that spot? Check out our single cupholder insert for the same spot. 🏷️We currently have ONE standard cup holder insert that is black with white stripes. There are no imperfections with this one. It was created based on a misunderstood order, and it looks super sharp with the white striping on black. Get it for a steal to free up space in our office. Ready to ship. 🏷️ SOLD We currently have ONE imperfect large (Owala sized) cup holder insert in black. An almost imperceptible bump printed on the top bridge, and you can snag it for a deal. SIZING The Standard size fits most cups and the iconic Stanley with the wider top and narrower bottom. The Larger size fits large bottomed bottles like the Owala 32 & 40oz and 32oz Nalgene!! We also recommend the larger size for large Chick-fil-A styrofoam cups. See the pics with the Owala bottles. We've also had customers road test it on their Zulu Chug and the new style of Stanley that is the same diameter top to bottom. Not sure if your cup will fit? Shoot us a message, and we can check the measurements. STRIPING Now offering stripes for that custom look. Choose your primary color from the drop down box and note your preferred stripe color (from our list of offered colors) in the personalization box. The sample photo has a primary color of black with red stripes. Dimensions of standard: Total height: 6.5" (includes the insert into the slot) Height above slot: 3.5" Total length: 9" (includes insert to end of offset cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder 9.3 ounces Weight Installation: See the video- simply drop it into that slot next to the shifter - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 16 year old Levi Hall (now 17) 🥤🧃5th gen 4 runners only (2010-2024). If you aren't sure if your gift recipient has a 5th gen 4 runner, message us, and we can probably help you figure it out. Not intended for small children, although you can definitely use this product to store their sippy cups.
Chevrolet Silverado Double Cup Holder Insert: 4th Gen (2019-Present) 3D Print PETG
💥FREE SHIPPING💥 DOUBLE cup holder insert for Chevy Silverado 1500 (2019-Present). It levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, small umbrellas, sippy cups, or whatever it is you need to live your daily life on the road. We are all about that extra beverage life, and we are a large family, so those extra cup holders are vital - sippy cups and sports bottles, anyone? The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Shown in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Available in the Large size that accommodates Owala 32 & 40 oz sizes and a Zulu Chug, something the original Silverado cup holder space will not accommodate. You do big things in your truck, and your cup holder space should be just as capable. 📌📌📌📌📌 Please double check the video and photos to make sure your truck’s cup holder set up looks the same as the model truck shown, since trim packages may vary. The model truck is a 2021 LTZ trim level📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Striping available. Choose your primary color from the drop down box, and note your stripe color (from our color options) in the personalization box. The sample shown has a primary color of black with red stripes. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
4Runner 5th Gen Single Cup Holder Insert: PETG, Center Console Organizer (2010-2024)
💥FREE SHIPPING💥 SINGLE cup holder insert for 4Runner 5 Gen (2010-2024). It levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, an air down kit, GMRS radio units, or whatever it is you need to live your daily life on or off the road. As avid 5th Gen 4Runner owners, we are all about that custom life, and we are a large family, so that extra cup holder is vital. The single cup holder insert increases the number of cup holders in the front of your 4Runner by using that odd space next to the shifter. No installation required. Simply drop it into that slot to the right of the shifter. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. 🎨Our sample in the pics is printed in PETG Voxel Blue, a color we have changed as we updated our filament to a brand we feel prints even better for our customers. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. 🖍️Now offering striped color combos. We NOW offer a larger version that will fit 32oz or 40oz Owala water bottles. The standard size fits most cups, including the very popular Stanley cup. Love the idea but need MORE cupholders in that spot? Check out our double cupholder insert for the same spot. The double has a Limited Time USA 250 option. Standard Size Dimensions: Total height: 6.5" (includes the insert into the slot) Height above slot: 3.5" Total length: 4.5" (includes insert to end of offset cupholder) Width: 5" edge of base to edge of cupholder 6.36 ounces Weight Mason jar size varies from the above. ➡️➡️IMPERFECT MASON JAR OPTION IN BT (Burnt Titanium) - this was our test print and has a bit of a glue smudge on the bottom. It is more than functional, and you won’t see the glue when in use/installed.🫙🫙 Installation: See the video- simply drop it into that slot next to the shifter - no tools, no glue - just insert and go. The video demos our double cup holder for the same spot. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 16 year old Levi Hall (now 17) 🥤🧃5th gen 4 runners only (2010-2024). If you aren't sure if your gift recipient has a 5th gen 4 runner, message us, and we can probably help you figure it out. Not intended for small children, although you can definitely use this product to store their sippy cups.
Nissan NV Double Cupholder Insert
💥FREE SHIPPING💥 Designed by our oldest son, this DOUBLE cup holder insert for Nissan NV 12 Passenger Van. Use it in the front or back rows. Move it when needed. This cup holder levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, hand lotion, wet wipes, or whatever it is you need to live your daily life on or off the road. As Nissan NV owners, we are all about that extra cup holder life, and we are a large family, so those extra cup holders are vital. The double cup holder adds a cup holder in the front of your NV console by using the existing cup holder space closest to the passenger seat. You can twist and adjust the angle how you like, leaving access to that small slot next to the passenger seat. OR you can use this cupholder insert to add a cup holder space on your back rows as shown. ⭐️⭐️⭐️SIZES⭐️⭐️⭐️ 🧋Standard Front Console fits normal drink cups and the iconic Stanley that has been so popular lately. Designed to fit best in the front console cup holders, BUT you can use it in the back if needed. 🥤Standard Back Rows Fits the usual sized cup bottoms in the back rows with a base designed for the more shallow cup holders in the back that were standard on the NV Passenger. 🥛Large Front Console Fits Owala 32 and 40oz water bottles with a base designed for the front console. Can fit the back rows in a pinch. 🥛Large Back Rows Fits Owala 32 and 40oz water bottles with a base designed for the more shallow cup holders that were included in the original NV. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. or buy one for each of your four rows. Quantity discounts are available. Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Striping - We offer striping. Choose your primary color from the drop down box and note your desired stripe color from our color offerings in the Personalization box. The primary color in the sample photo is black, and the stripe color is red. Love the idea and want to add more cup holders to your other vehicles? Check out more designs by our 17 year old son at www.ExtraCupHolders.com Installation: See the video- simply push it into an existing cup holder - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Not intended for small children, although you can definitely use this product to store their sippy cups, half eaten snacks, and shreds of your sanity.
Ford Expedition QUADRUPLE Cup Holder Insert: 4th Gen (2018-2024) PETG
💥FREE SHIPPING💥 QUADRUPLE cup holder insert for Ford Expeditions 4th Gen (2018-2024). Made for the back of your console, it levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, wet wipes, sunglasses, sunscreen, small umbrellas, sippy cups, or whatever it is you need to live your daily life on the road. As Ford Expedition owners, we are all about that extra beverage life, and we are a large family, so those extra cup holders are vital - sippy cups and sports bottles, anyone? The quadruple cup holder adds an extra cup holders at the back of your console- providing FOUR spots for those seated in the second row. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Our sample in the pics is printed in PETG black, and we also offer it in many colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. SIZING The Standard size fits most cups and the iconic Stanley with the wider top and narrower bottom. The Larger size fits large bottomed bottles like the Owala 32 & 40oz!! See the pics with the Owala bottles. We've also had customers road test it on their Zulu Chug and the new style of Stanley that is the same diameter top to bottom. Not sure if your cup will fit? Shoot us a message, and we can check the measurements. STRIPING Note: This is a real mom vehicle demonstrating real life. We appreciate the mom who let us use her mom-mobile for measurements and photos. Love the idea? Check out the inserts we offer for other vehicle models, including the front console cup holder for Expeditions. Don’t see the one you need? Message us, and we will see if we can make it happen 💥💥As of December 16, 2025, we now offer a larger size that will fit those wider 32oz and 40oz Owala water bottles. If that is the size you need, be sure to select the larger size option. The standard size does fit most cups and the very popular Stanley cup. 📌📌📌These do NOT fit in 3rd generation Expeditions (2007-2017). We are hoping to bring a product to the market soon to fit those. In the meantime, we suggest 3rd Generation Expedition owners consider purchasing two of the singles. The single that fits the front console spot works in both of the back of console spots. Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: " Width: " edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups, half eaten chicken nuggets, and shoes they may hand you.
Chevrolet Traverse Double Cup Holder Insert: 2nd Gen (2018-2023) 3D Print PETG Chevy
💥FREE SHIPPING💥 Add a cup holder space with a DOUBLE cup holder insert for a Chevrolet Traverse 2nd Gen (2018-23). AND there is a large option if you have bigger water bottles that do not fit in the existing cup holder spaces. Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, sunglasses, small umbrellas, chapsticks, or whatever it is you need to live your daily life running the roads. We are all about that extra beverage life and added space. The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for you and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. SIZING Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes, something the original Traverse cup holder space will not accommodate. 📌📌📌📌📌 Please also double check the video and photos to make sure your Traverse’s cup holder set up looks the same as the model shown, since trim packages may vary. The model Traverse is a 2021 LT.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. STRIPING AVAILABLE - Like a sporty look? Go for stripes. Choose a primary color from the drop down box for colors and note which color you would like your stripes to be in the personalization box. We can only use the colors listed as options. In the sample photo with stripes, the primary color is black, and the stripe color is red. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups and half eaten sandwiches.
Chevrolet Malibu Double Cup Holder Insert: 9th Gen (2016-2025) 3D Print PETG Chevy
💥FREE SHIPPING💥 Add a cup holder space with a DOUBLE cup holder insert for a Chevrolet Malibu 9th Gen (2016-2025). AND there is a large option if you have bigger water bottles that do not fit in the existing cup holder spaces. Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, sunglasses, small umbrellas, chapsticks, or whatever it is you need to live your daily life running the roads. We are all about that extra beverage life and added space. The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes, something the original Malibu cup holder space will not accommodate. 📌📌📌📌📌 Please also double check the video and photos to make sure your Malibu’s cup holder set up looks the same as the model shown, since trim packages may vary. The model Malibu is a 2024 LT.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. STRIPING AVAILABLE - Like a sporty look? Go for stripes. Choose a primary color from the drop down box for colors and note which color you would like your stripes to be in the personalization box. We can only use the colors listed as options. In the sample photo with stripes, the primary color is black, and the stripe color is red. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups and half eaten sandwiches.
Ford F150 Holder Insert: 13th Gen (2015-2020) PETG 3D Print
💥FREE SHIPPING💥 DOUBLE cup holder for the Ford F150 13th Gen (2015-2020). Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, sunglasses, extra keys, charging cables, Swiss Army knives, small umbrellas, duck calls, sippy cups, or whatever it is you need to live your daily life on the road. We are all about that extra beverage life, and we are a large family, so those extra cup holders are vital - sports bottles, anyone? The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Shown in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Also available in the Large size that accommodates Owala 32 & 40 oz sizes, something the original F150 cup holder space will not accommodate. You do big things in your truck, and your cup holder space should be just as capable. 📌📌📌📌📌 Please double check the video and photos to make sure your truck’s cup holder set up looks the same as the model truck shown, since trim packages may vary. The model truck is a 2019 STX SuperCab.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
Red Bull Special Edition 8.4 oz Cup Holder Insert
A CAN do attitude in action. Secure your Red Bull Special Edition in this cup holder insert and hit the road. ❌This does NOT fit a standard Red Bull can.❌ No installation required. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Our sample in the pics is printed in PETG black, and we offer it in several colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the replacement cup holder insert to? Message us, and we will see if we can make it happen in the time frame you need. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall 🥤🧃Which vehicles does this fit? Great question! We have found it fits a 2021 Chevrolet Traverse, a 2024 Ford F150, a 2024 Chevrolet Malibu, a Mini Cooper S, and a 2023 Jeep Grand Cherokee. Not intended for small children.
Honda Odyssey Double Cup Holder Insert: 2018-Present (5th Gen) PETG
💥FREE SHIPPING💥 Add a cup holder space with a DOUBLE cup holder insert for a Honda Odyssey 5th Gen (2018-Present). AND there is a large option if you have bigger water bottles that do not fit in the existing cup holder spaces. Level up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, sunglasses, small umbrellas, sunscreen, half eaten sandwiches from your toddler, or whatever it is you need to live your daily life running the roads. We are all about that extra beverage life, and we are a large family, so those extra cup holders are vital - sippy cups and sports bottles, anyone? The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes, something the original Honda cup holder space will not accommodate. 📌📌📌📌📌 Please also double check the video and photos to make sure your van’s cup holder set up looks the same as the model shown, since trim packages may vary. The model van is a 2025.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Are you interested in racing stripes on your cup holder or our Limited Edition USA 250 option? Message us, and we can make it happen. We ran out of picture space on this listing, but those options can been seen on our other cup holder listings. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
Dodge 1500 Ram Big Horn/Lone Star Double Cup Holder Insert: 4th Gen (2009-2018) PETG
💥FREE SHIPPING💥 DOUBLE cup holder insert for Dodge Ram 1500 Big Horn Edition 4th Gen (2009-2018) - known as the Lone Star Edition if you are blessed to live in Texas. It levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, small umbrellas, sippy cups, or whatever it is you need to live your daily life on the road. We are all about that extra beverage life, and we are a large family, so those extra cup holders are vital - sippy cups and sports bottles, anyone? The double cup holder adds an extra cup holder in either of your front console cup holder spaces, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Available in Standard size which fits most cups and the iconic Stanley with the narrow bottom and wide top. Shown in the Large size that accommodates Owala 32 & 40 oz sizes and a Zulu Chug, something the original Ram cup holder space will not accommodate. You do big things in your truck, and your cup holder space should be just as capable. 📌📌📌📌📌 Remove the original rubber insert in the cup holders for proper fit. Please also double check the video and photos to make sure your truck’s cup holder set up looks the same as the model truck shown, since trim packages may vary. The model truck is a 2015.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Striping available. Choose your primary color from the drop down box, and note your stripe color (from our color options) in the personalization box. The sample shown has a primary color of black with red stripes. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
Ford Expedition Double Cup Holder Insert: 4th Gen (2018-2024) PETG
💥FREE SHIPPING💥 DOUBLE cup holder insert for Ford Expeditions 4th Gen (2018-2023). It levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, small umbrellas, sippy cups, or whatever it is you need to live your daily life on the road. As Ford Expedition owners, we are all about that extra beverage life, and we are a large family, so those extra cup holders are vital - sippy cups and sports bottles, anyone? The double cup holder adds an extra cup holder in your front console, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. 📌📌⚠️2022 -2024 models, please message us before ordering. There is a slight variation on those years we are actively working to redesign. SIZING The Standard size fits most cups and the iconic Stanley with the wider top and narrower bottom. The Larger size fits large bottomed bottles like the Owala 32 & 40oz!! See the pics with the Owala bottles. We've also had customers road test it on their Zulu Chug and the new style of Stanley that is the same diameter top to bottom. Not sure if your cup will fit? Shoot us a message, and we can check the measurements. Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Striping now available. Choose your primary color from the drop down box and note your preferred stripe color in the personalization box. The sample photo has a primary color of black with red stripes. Note: This is a real mom vehicle demonstrating real life. Any two year old you heard fussing in the background of the demo video is not a paid actor. 😆 Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions for Standard Size: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
Ford Expedition QUADRUPLE Cup Holder Insert: 3rd Gen (2007-2017) PETG
💥FREE SHIPPING💥 QUADRUPLE cup holder insert for Ford Expeditions 3rd Gen (2007-2017). Made for the back of your console, it levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, wet wipes, sunglasses, sunscreen, small umbrellas, sippy cups, or whatever it is you need to live your daily life on the road. As Ford Expedition owners, we are all about that extra beverage life, and we are a large family, so those extra cup holders are vital - sippy cups and sports bottles, anyone? The quadruple cup holder adds an extra cup holders at the back of your console- providing FOUR spots for those seated in the second row. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. Love the idea? Check out the inserts we offer for other vehicle models, including the front console cup holder for Expeditions. Don’t see the one you need? Message us, and we will see if we can make it happen 💥💥As of December 16, 2025, we now offer a larger size that will fit those wider 32oz and 40oz Owala water bottles. If that is the size you need, be sure to select the larger size option. The standard size does fit most cups and the very popular Stanley cup. The listing photos are in the standard size. 📌📌📌Please double check the video to make sure your Expedition looks similar to the insert spot and that you do have the rubber inserts that were original to those spots for the best fit. Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: " Width: " edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups, half eaten chicken nuggets, and shoes they may hand you.
Ford Expedition Double Cup Holder Insert: 3rd Gen (2007-2017) PETG
💥FREE SHIPPING💥 DOUBLE cup holder insert for Ford Expeditions 3rd Gen (2007-2017). It levels up your daily adventure by expanding storage space. Use it for drinks, water bottles, phones, hair bands, extra keys, charging cables, Swiss Army knives, small umbrellas, sippy cups, or whatever it is you need to live your daily life on the road. As Ford Expedition owners, we are all about that extra beverage life, and we are a large family, so those extra cup holders are vital - sippy cups and sports bottles, anyone? The double cup holder adds an extra cup holder in your front console, and it can be twisted to get an angle that works best for your and your front passenger. Printed in strong and sturdy PETG, it is made to stand up to the heat of a hot summer day. These make great gifts. Buy one for yourself, and buy one for your friends and family. 📌📌📌📌📌 This only fits in the cupholder spot closest to the console. You need the original rubber insert in the cup holders for proper fit.📌📌📌📌📌 Our sample in the pics is printed in PETG black, and we also offer it in many other colors. Is there another color your prefer for your custom life that is just more you or the person you plan to gift the double cupholder to? Message us, and we will see if we can make it happen in the time frame you need. SIZING The Standard size fits most cups and the iconic Stanley with the wider top and narrower bottom. The Larger size fits large bottomed bottles like the Owala 32 & 40oz!! See the pics with the Owala bottles. We've also had customers road test it on their Zulu Chug and the new style of Stanley that is the same diameter top to bottom. Not sure if your cup will fit? Shoot us a message, and we can check the measurements. Striping now available. Choose your primary color from the drop down box and note your preferred stripe color in the personalization box. The sample photo has a primary color of black with red stripes. Love the idea? Check out the inserts we offer for other vehicle models. Don’t see the one you need? Message us, and we will see if we can make it happen Dimensions: Total height: " (includes the insert into the slot) Height above slot: 3.5” Total length: " (includes base of cupholder) Length above slot: 7.75" Width: 5" edge of base to edge of cupholder ounces Weight Installation: See the video- simply insert it into - no tools, no glue - just insert and go. Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed & Produced by Hall About Design, a family business based in North Louisiana. Product Designer - 17 year old Levi Hall, who drives a 3rd Gen Expedition. Made in the USA. Not intended for small children, although you can definitely use this product to store their sippy cups.
Visor Buddy Car Accessory for Sunglasses or Reading Glasses
😎This car accessory is a playful yet practical glasses holder designed to clip onto the sun visor above your head. Its distinctive feature is the nose-shaped mount: when you place your sunglasses or reading glasses on it, it instantly creates a funny little face looking back at you. Besides keeping your eyewear always within reach, the “nose” includes a slim slot where you can slide parking tickets, receipts, or small papers so you don’t lose them in the car. It’s a compact, convenient, and characterful way to keep your essentials organized on the road. Size: 3.98" x 2.37" x .98" Weight: .76 ounces Materials: PETG, which withstands the high heat often experienced in vehicles better than PLA. Notes: Color may vary due to screen variations. This is a custom 3D printed product, made to order, and will have layer lines and other variations that will make it uniquely yours. Designed by creaserra, a Cubee partner. Produced by Hall About Design, a family business based in North Louisana Not intended for small children, although you can definitely use this product to store their sunglasses.
Last updated: 7/17/2026, 4:40:50 PM